APRILIA SR 50 Workshop Manual page 48

SR 50
•
Loosen and remove the filler plug (3) and oil drain plug
(2).
• Let oil fully drain off the crankcase.
•
Tighten the drain plug (2) and pour through the filler
130 cu. cm (7.93 cu. in) of oil, see (LUBRICANT
CHART).
•
Tighten the filler plug (3).
WARNING
Firmly tighten the filler and drain plugs and
ensure there are no oil leaks.
Periodically check that there are no leaks at the
crankcase cover gasket.
Do not use the vehicle with insufficient
lubrication or with contaminated or unsuitable
lubricants, since this would cause early wear of
the moving parts
irreparable failures.
WWW.PlanDeGraissage.ORG
and may also cause
PERIODIC MAINTENANCE
2 - 29