SR 50
2.2.7.
MIXER OIL IE50
TOPPING UP
CAUTION The vehicle fits a control unit that manages an
electronic pump controlling the correct quantity of oil for
engine lubrication.
•
Remove the front cover, see (REMOVING THE
FRONT COVER).
•
Remove the plug.
•
Fill with oil, see (LUBRICANT CHART)
•
Refit the plug.
AIR BLEED
CAUTION The vehicle fits a self-bleeding electronic pump.
If the oil in the mixer oil tank is low or if the mixer oil line -
from the mixer to the reed assembly - is removed, it is
necessary to bleed the system. Proceed as follows:
•
Completely open the throttle grip.
•
Keep the throttle open, turn the key to ON.
•
You will hear the noise of the pump.
•
Look at the mixer oil line going from the mixer to the
reed assembly and keep the throttle completely open
until the line is full of oil.
•
Release the throttle twistgrip.
•
If necessary, top up with mixer oil as described above.
PERIODIC MAINTENANCE
2 - 31