CYCLE PARTS
5.3.2.
REMOVING THE FRONT WHEEL
WARNING
When removing/refitting, pay utmost attention
not to damage the brake line, disc and pads.
•
Position the vehicle on the centre stand.
•
Set a support under the frame.
•
Remove the brake calliper, see (CHANGING THE
FRONT AND REAR BRAKE PADS).
•
Loosen and remove the wheel shaft nut.
•
Loosen the shaft screws.
•
Loosen and remove the wheel shaft.
•
Collect the odometer drive fitment.
•
Slide out the wheel.
WARNING
Do not operate the front brake lever when the
wheel is not in place or the calliper piston
might come off its housing, thus causing brake
fluid leakage.
5 - 22
WWW.PlanDeGraissage.ORG
SR 50