CYCLE PARTS
5.4.2.
REMOVING THE REAR WHEEL
•
Position the vehicle on the centre stand.
•
Set a support under the frame.
•
Remove the exhaust system, see (REMOVING THE
EXHAUST SILENCER).
•
Release and remove the two screws.
•
Slide out the rear brake calliper, keep it connected to
the fluid line.
•
Remove cover.
•
Remove the split pin on the wheel shaft.
•
Remove nut cover.
•
Loosen and remove the wheel shaft nut.
•
Remove the rear wheel together with brake disc, slide
it out from the right side.
WARNING
Do not operate the front brake lever when the
wheel is not in place or the calliper piston
might come off its housing, thus causing brake
fluid leakage.
5 - 24
WWW.PlanDeGraissage.ORG
SR 50