Table of Contents
Advertisement
or
or
22
RQT6035
or
or
!?
Insert label-up with the arrow
facing in.
(With double-sided discs, load
so the label for the side you want
to play is facing up.)
e.g.: DVD-RAM
Playing discs
RAM DVD-R DVD-V
CD VCD
Preparation
Switch [DVD, TV] to "DVD".
1
Press [
, POWER] to turn the unit on.
2
Press [û, OPEN/CLOSE] to open the
tray and insert a disc.
Insert inside the tray's guides.
Insert one disc only.
3
Press [
, PLAY].
The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
If you insert a DVD-RAM with the write-protect tab set to
page 99) and press [û û û û û , OPEN/CLOSE], play
PROTECT (
starts automatically.
To stop play
A
Press [ , STOP] (When "PLAY" flashes
from where you stopped it).
The screen saver at right may appear when
you stop play. Press [ , STOP] again and
you can use this unit's tuner to watch
television.
This screen is also shown when you are
playing CDs.
To pause play
Press [», PAUSE].
Press again to restart play.
Auto power-off
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
(
page 82, ACTION—Set Up—Off Timer).
With non-cartridge discs
!?
Insert label-up. (With double-sided discs, load
so the label for the side you want to play is facing up.)
Guide for 12 cm
(5") disc
TOP
page 23, Starting play
Guide for 8 cm
(3") disc
Advertisement
Table of Contents
