Page 1
8 CHANNEL/ 16 CHANNEL DVR User Manual SDE-4001/5001...
Page 2
overview FEATURES The DVR employs H.264 video encoding for 8 or 16 channel inputs and G.723 audio encoding for 8 or 16 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data.
IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.
Page 4
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock.
SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.
CONTENTS Features OVERVIEW Important Safety Instructions Before Start Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control Checking the Installation Environment INSTALLATION CONNECTING WITH OTHER DEVICE Connecting the Video, Audio, and Monitor Connecting the Camera Camera Bracket Connecting the USB Connecting the Alarm Input/Output Connecting the Network...
Page 8
Playback WEB VIEWER Introducing Web Viewer Connecting Web Viewer Using Live Viewer Using Search Viewer Viewer Setup About Mobile Viewer BACKUP VIEWER SEC Backup Viewer APPENDIX Product Specification (Camera) Product Specification (SDE-4001) Product Specification (SDE-5001) Default Setting Troubleshooting 8_ overview...
PART NAMES AND FUNCTIONS (FRONT) Part Names Functions Power Used to turn the DVR ON/OFF. Used to select channel numbers directly in the Live Mode, or numbers in the numeric input mode. CHANNEL 1–9 : Press each button between 1 to 9. (8CH : 1-8) Channel ...
PART NAMES AND FUNCTIONS (REAR) SDE-4001 AUDIO IN 1 VIDEO OUT CONSOLE NETWORK CAMERA POWER DVR POWER VIDEO IN 1 ALARM IN ALARM OUT VIDEO IN 2 AUDIO IN 2 AUDIO OUT 1 - 12 CH 13 - 16 CH...
REMOTE CONTROL BACKUP SEARCH Displays the search menu. Displays the Backup Menu. MODE Changes the screen mode. Activates the DVR function. POWER Displays the Exit pop up screen. NUMBER [0~ + 10] Used as the numeric input keys, or displays a single channel.
Life (Unit: HOURS) [Figure 1] The followings are the recommendations when Samsung DVR is installed on a rack. Please ensure that the rack inside is not sealed. Please ensure the air is circulated through the inlet/outlet as shown in the picture.
connecting with other device CONNECTING THE VIDEO, AUDIO, AND MONITOR Do not connect UTP camera and BNC camera simultaneously. (CH1, CH2) AUDIO IN 1 VIDEO OUT CONSOLE NETWORK CAMERA POWER DVR & CAMERA POWER VIDEO IN 1 ALARM IN ALARM OUT VIDEO IN 2 AUDIO IN 2...
Page 14
connecting with other device Name Description Camera Fitting Groove that is used to fi t the camera bracket. Groove There are two grooves; one on the top and one on the bottom. IR LED These infrared LED's are controlled by the illumination sensor. Lens Focal length of 3.8mm enables you to cover relatively longer range of monitoring.
CAMERA BRACKET The camera bracket can be used to install the camera on the wall, ceiling or shelf. Camera Bracket Specification Name Description Indoor Installation Wall or Ceiling 57(W) x 47.2(H) x 100.5(L) mm/ Dimensions 2.25(W) x 1.86(H) x 3.95(L) inch Weight 130g (0.29 lbs) Operating Temperature...
connecting with other device CONNECTING THE USB By factory default, a USB port is provided for external connection. You can connect a USB HDD, USB memory or mouse to the USB port. If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device > Storage Device”.
CONNECTING THE NETWORK Connecting to Internet through Ethernet (10/100/1000BaseT) AUDIO IN 1 VIDEO OUT CONSOLE NETWORK CAMERA POWER DVR & CAMERA POWER VIDEO IN 1 ALARM IN ALARM OUT VIDEO IN 2 AUDIO IN 2 AUDIO OUT 1 - 12 CH 13 - 16 CH SENSOR POWER RJ-45 Ethernet Cable...
Page 18
connecting with other device Connecting to Internet through ADSL AUDIO IN 1 VIDEO OUT CONSOLE NETWORK CAMERA POWER DVR & CAMERA POWER VIDEO IN 1 ALARM IN ALARM OUT VIDEO IN 2 AUDIO IN 2 AUDIO OUT 1 - 12 CH 13 - 16 CH SENSOR POWER RJ-45 Ethernet Cable...
live GETTING STARTED Starting the system Connect the power cable of the DVR to the wall outlet. Press the Power button on the front panel. You will see the initialization screen. The initialization process will last about 1 minute. The live screen appears with a beep. Shutting Down the System You can shut down the system only if you have logged in to the DVR.
Page 20
live Login To access a DVR or restricted menu, you should have logged in to the DVR. In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right Scene Mode ZOOM fi...
LIVE SCREEN CONFIGURATION Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. 2011-01-01 00:00:01 CAM 01 CAM 01 Name Description Current Date, Time Displays the current time and date. Login Information When you are logged in, the “LOG ON”...
Page 22
live Error Information • If the internal HDD is not connected, the “NO HDD”( ) message will appear; if there occurs a problem, you will see the “HDD FAIL”( ) message in the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.
Page 23
Menu Description Scene Mode Refer to “Live Mode”. (Page 25) Audio On/Off Refer to “Audio ON/OFF”. (Page 28) Freeze Refer to “Freeze”. (Page 28) Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. Stop Alarm (Page 29) Record/Stop Starts/stops the standard recording.
If no input is entered for 10 seconds, the menu will disappear. The Launcher menu can be accessed only by using the mouse. SDE-4001 do not support the 16-split screen mode. Alarm Freeze Menu Description Displays the current time and date.
Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the launcher menu items. SDE-4001 do not support the 16-split screen mode. CH10 CH11 CH12 CH13...
Page 26
live Manual Switching Press the left/right button on the front panel or the remote control, or click the arrow <◄/►> key to move to the next split mode. • If pressing the right [►] button in 9-split mode : 9-split (CH 1~9) mode 9-split (CH 10~16) mode Auto Sequence CH10...
Channel Setting You can display the channel in a desired area of a split screen. Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen. Click a camera name to display a channel list where you can select a different channel. Select a desired channel and click it.
live ZOOM This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. Select <ZOOM> in the right-click menu. Press the [ZOOM] button on the remote control, or simply click < >...
EVENT MONITORING This will display the channel in sync with a specifi c event (Sensor/Motion/Video Loss) if it occurs. In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 44) • If multiple events occur simultaneously, the screen will switch to a split mode. - 2~4 events : 4-split mode - 5~9 events : 9-split mode - 10~16 events : 16-split mode...
using the DVR You can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen.
- Time Server : Enter an IP or URL address of the time Date/Time/Language server. Date/Time/Language Holiday - Last Sync Time : Displays the most recent Date Time Synchronization Setup 2011 -01-01 YYYY-MM-DD synchronization time from the selected time server. - Activate as Server : Set to <Use>...
Page 32
using the DVR Permission Management You can set permissions of each user over the DVR's specifi c function and settings. Setting the Administrator You can set and change Administrator’s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help make setup easier.
Search Setup screen according to the channel. Setup Backup SDE-4001 shows a list of 8 channels in Channel Setup window. Cancel • Search : You can set the permission to access the Search menu according to the channel. Cancel •...
Page 34
using the DVR To restrict the user permissions If the admin restricts all permissions of an added group, the users belonging to that group can access only the default minimum menus and can change the user’s own password only. Start the DVR. If all permissions are restricted, only the Login dialog should appear.
Page 35
Setting the User Users can be added only if a group was created in <Group> menu. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <System> window to Permission Management move to <Permission Management>, and press User Admin Group...
Page 36
using the DVR • Manual Input of ID : Prompts you to enter the user ID manually for the login process. - Checked ( ) : Encloses the registered user IDs with the [ ] symbols. Login Use the virtual keyboard to enter the user ID. ***** Password When the permission setup is done, press <OK>.
• Updating the Software Connect a device storing the software to be updated. System Management (It may take about 10 seconds to recognize the device.) System Information Settings Upgradeable devices include USB memory and network device. System Information Software Version V1.0xh_yymmddhhmmss ...
using the DVR Settings You can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <System> window to System Management move to <System Management>, and press [ENTER] Settings System Information button.
Event Log Event log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <System> window to Log Information move to <Log Information>, and press [ENTER] button.
using the DVR SETTING THE DEVICE You can confi gure the settings of: Camera, Storage Device, Remote Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier. Press the [MENU] button on the remote control or front Logout panel.
Page 41
• Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, confi gure the DVR display to your preferences. Select a channel and adjust the < (Brightness)>, < (Contrast)>, and < (Color)> of the selected channel. •...
Page 42
using the DVR Formatting You can format a storage device. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <Device> window to Storage Device move to <Storage Device>, and press [ENTER] button. Format Device HDD Alarm Select <Format>.
Page 43
• Duration : Sets the alarm duration for the alarm signal and beep sound. <Check> status means that the HDD is operating but it has problems that require technical examination. ) appears on the Live screen. <Replace> status means that the HDD has defect and requires immediate replacement. ) appears on the Live screen.
using the DVR Screen Setup Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data. In the <Device> window, press the up/down (▲▼) button to move to <Monitor> and press the [ENTER] button.
SETTING THE RECORDING You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the recording on specifi ed time. Using the mouse may help make setup easier. Press the [MENU] button on the remote control or front panel.
Page 46
using the DVR Recording Color Tags Color Function Description White No Recording No schedule / event recording Orange Continuous Scheduled recording only Blue Event Event recording only Green Both(Cont&Evnt) Both scheduled / event recordings Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>- <Both(Cont&Evnt)>.
Page 47
REC Quality / Resolution You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event. Setting Standard Recording Properties You can set each channel’s resolution, quality and IPS for normal recordings. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <Record>...
Page 48
using the DVR Record Option You can set the recording to stop or overwrite when the HDD is full. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <Record> window to Record Option move to <Record Option>, and press [ENTER] button. Use direction buttons (▲▼◄...
SETTING THE EVENT You can set recording options for sensor, motion, and video loss event. Sensor Detection You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration. Using the mouse may help make setup easier. Press the [MENU] button on the remote control or front Logout Exit...
Page 50
using the DVR Motion Detection You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <Event>...
Page 51
Video Loss Detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier. Use the up/down buttons (▲▼) in <Event> window to Video Loss Detection move to <Video Loss Detection>, and press [ENTER] button.
(such as Windows Media Player) on a PC. - DVR : Saved data can be played back only by the DVR. - SEC : Saves data in the Samsung’s proprietary format with built-in viewer, which supports immediate playback on a PC.
When the backup setup is done, press <OK>. If no available device is recognized for backup, <OK> button is not activated. The application may slow down during the backup. You can switch to the menu screen during the backup in operation, but playback of data is not available. ...
using the DVR • IP, Gateway, Subnet Mask, and DNS Connection Mode - For <Static IP> : You can directly input IP address, Connection Protocol Gateway, Subnet Mask and DNS. Connection Mode ADSL Bandwidth 600kbps - For <Dynamic IP> : IP address, Gateway, and Subnet Mask are set automatically.
Page 55
Connecting and Setting the Network Networking may differ from the connection method, check your environment before setting the connection mode. When no router is used • Static IP mode - Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the DVR and remote user.
Page 56
using the DVR • Setting the DVR Network Set the <Connection Mode> in <Connection> menu of the connected DVR to <Static IP>. Check whether the set IP address is in the static IP range provided by the IP router. IP, Gateway, and Subnet Mask : Consult your network manager. ...
Refer to “Using Virtual Keyboard”. (Page 32) User Password ******** DDNS Host Address http://m7211b7.websamsung.net:80 If selected <OFF> or <Samsung DDNS>, input fi elds are deactivated. DDNS Host Address only appears when Samsung DDNS is selected. Cancel When the DDNS setup is done, press <OK>.
Page 58
using the DVR Mailing Service You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs. If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notifi...
Group Setting You can set the group to whom the e-mail is sent, and specify the permission for each group. You can add recipients for each group in the <Recipient> menu item. The recipient is set separately from the DVR user group. Using the mouse may help make setup easier.
search & play SEARCH You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the <Search> menu directly in Live mode. In Live mode, right-click any area of the screen. The Live menu appears.
• Zoom In : The map enlarges in detail. Time Search It will switch in the sequence of 24 hours - 16 hours - 8 hour 2011-01-01 Go to First Go to Last - 4 hours. Overlapped Data List1 Zoom In Zoom Out 00:01 •...
search & play Motion Search If a motion is detected in each channel, you can set a desired area to perform the search. You can use the mouse to select the related items. Select <Motion Search> in the <Search> menu. Motion Search Use direction buttons (▲▼◄...
PLAYBACK Play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help make setup easier. In Live mode, click <Play> in the right-click menu or < > in the launcher menu, or press the Play button on Scene Mode ZOOM the remote control or the front panel.
Page 64
search & play Using the Playback Button Part Names Functions Play Timeline Indicates the current playback point, and can be used to move. Skip Backward Moves backward by unit time. Backward Fast Used for quick backward search while in Play. Play Backward Slow Used for backward frame-by-frame search while in PAUSE.
web viewer INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video etc. PRODUCT FEATURES • Remote access from a standard browser • Supports 1, 4, 8, 16 camera viewing formats (maximum of 16 cameras in the list).
web viewer CONNECTING WEB VIEWER Open your web browser and type the IP address or URL of DVR into the URL address box. The basic URL of the DVR is as following in case of MAC address : 00-00-F0-ab-cd-ef : nabcdef.websamsung.net ...
USING LIVE VIEWER The Live Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>. These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected DVR.
Page 68
web viewer OSD INFORMATION DISPLAY The channel number, video size, and IP address of the connected DVR are displayed. The current date and time will be displayed according to the selected time information display setting <DVR Time> or <PC Time>. Alarm icon appears when alarm is issued.
Page 69
CONNECTED DVR This displays the IP address and the status of the connecting DVR. Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded. ...
Page 70
CAPTURE : Saves the current screen into a BMP or JPEG fi le. The default saving path is “C:\Program Files\Samsung\Dvr Web Viewer\SnapShot\Live”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.
Page 71
To record it, it is required at least 1GB of available space. The default saving path is “C:\Program Files\Samsung\Dvr Web Viewer\VideoClip\Live”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.
web viewer USING SEARCH VIEWER The Search Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>. These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected DVR.
Page 73
SPLIT-SCREEN You can change the split mode by clicking each number icon. SINGLE MODE QUAD MODE • Click < > button. The screen displays the selected camera connected to the DVR in “SINGLE MODE”. • Click < > button. The screen displays the selected camera connected to the DVR in “QUAD MODE”.
Page 74
<SAVE PATH ( )> button and then select the path you want. For Windows Vista, the saving path is “C:\users\(user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\VideoClip\” and it cannot be modifi ed. The fi le is automatically named as following : “IP address_Port number_YYYYMMDD_camera number_index”...
Page 75
SEARCHING THE RECORDED VIDEO IN THE CALENDAR If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. When you click <Today>, it will be synchronized with the system time (date) of the current PC.
web viewer CONTROLLING PLAYBACK Fast Backward : Reverse-plays faster(2x). Reverse Play : Performs Reverse Play. Play : Performs playback. Fast Forward : Plays faster(2x). Go to First : Moves the beginning time of recorded video in the time line. Step Backward : Performs one step reverseplay by one frame. Pause : Stops the playback temporarily.
Page 77
• Time Synchronization Setup Set the time synchronization. • Display Date Format : Set the date type. Time : Select a time format to display on the screen. • DST (Daylight Saving Time) DST is displayed an hour ahead of the standard time of the time zone.
Page 78
web viewer • Group Users are classifi ed into groups and the permission can be set according to the group. First of all, add a group. • User You can add, change or remove a user or users. • Setup You can set the user permission.
Page 79
Device You can check a list of devices that are connected to the DVR and confi gure the necessary settings. Click <Device> in the menu screen. For more information, refer to “Setting the Device”. (Page 40) Camera • Camera You can confi gure the settings of the camera that is connected to the DVR.
Page 80
web viewer Remote Device You can specify the Remote Control ID for the device that is connected to the DVR. Monitor • Monitor You can confi gure the monitoring screen settings and set the output system. • Mode You can switch between live mode and play mode. 80_ web viewer...
Record For more information, refer to “Setting the Recording”. (Page 46) Recording Schedule If you set a recording schedule for a specifi c date and time, the recording will start at that specifi c time. - Apply to All CH : Click <Apply to All CH> to display the confi...
web viewer Record Option You can set the Disk End Mode. Event For more information, refer to “Setting the Event”. (Page 49) Sensor Detection You can set the sensor operation mode and the synchronized camera as well as the alarm output type and the duration. Motion Detection You can set the motion detection mode and the sensitivity as well as the alarm output type and the duration.
Page 83
Video Loss Detection You can set the alarm output time if a video loss occurs. Alarm Schedule You can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs.
Page 84
DDNS You can check the DDNS settings. DDNS Host Address only appears when Samsung DDNS is selected. Live Transfer A remote user can set the images of the DVR. • Live Transfer A remote user can set the image resolution of the transferred data.
• Event You can set the event interval and specify which events the server sends mails for. • Group You can add a group to receive the mail if an event occurs and set the permission to receive the event mail for each group.
web viewer MOBILE VIEWER What is Mobile Viewer? Mobile Viewer is management software that enables you to connect to DVR (Digital Video Recorder) remotely. Key Features • Remote access via Smart phone • 1-split and 4-split modes supported in Live Viewer (However, search is not available).
backup viewer SEC BACKUP VIEWER You can play a fi le that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two fi les: one for the backup data and one for the viewer. If you run the backup fi...
Page 88
backup viewer Name Description A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. Audio You can adjust the volume level from 0 to 100. Saves the current screen as an image fi le. Supported fi le formats include BMP and JPEG.
appendix PRODUCT SPECIFICATION (CAMERA) Details Item SEB-1005R N SEB-1005R P SED-1001R N SED-1001R P Electrical Input Voltage DC 12V(by UTP) DC 12V(by UTP) DC 12V(by UTP) DC 12V(by UTP) Power Consumption 2.6W 2.6W 2.2W 2.2W Video Imaging Device MT9V138 MT9V138 MT9V138 MT9V138 Total Pixels...
DEFAULT SETTING This returns the factory default settings. The settings are made as follows; • Use System/Load Factory Default in MENU The default settings are based on SDE-5001. Category Details Factory Default Date YYYY-MM-DD Time Format 24 hours Time Zone Date/Time/Language Date/Time/Language Time Synchronize...
Page 96
appendix Category Details Factory Default Recording Schedule Channel 1 Event PRE Event Event Record Duration POST Event 1 min Resolution CIF(S) Standard Frame Rate 7.5 ips Record Quality Level 4 REC Quality/ Recording Resolution Resolution 4CIF(L) Event Frame Rate 7.5 ips Record Quality Level 4 Setup...
Page 97
Category Details Factory Default Connection Mode Static IP Bandwidth 2Mbps 192.168.1.200 Connection Gateway 192.168.1.1 Connection Mode Subnet Mask 255.255.255.0 168.126.63.1 Protocol Type Protocol Port (TCP) 554~558 Webviewer Port DDNS DDNS Site Network Resolution CIF(S) Live Transfer Quality Server Port SMTP Use Authentication Secure Transfer Never...
appendix TROUBLESHOOTING Symptom Countermeasures The system does not turn on and the indicator on the Check if the power supply system is properly connected. front panel does not work at all. Check the system for the input voltage from the power source. If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if neccessary.
Page 99
Symptom Countermeasures A message of “Need to reset date/time.” Is displayed This message is displayed if there occurs a problem with the time on the screen. setting of the internal clock or an error in the clock itself. Contact the retailer or the service center for more information. The time bar is not displayed in Search mode.
Page 100
appendix Symptom Countermeasures Recording does not work. If your player does not display a Live image at all, that indicates recording does not work so fi rst check if you see an image on the screen. Recording does not work if the recording settings are not properly confi...
Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
Page 102
of the Program a copy of this License along with the Accompany it with a written offer, valid for at least Program. three years, to give any third party, for a charge no more than your cost of physically performing You may charge a fee for the physical act of transferring source distribution, a complete machine-readable a copy, and you may at your option offer warranty...
Page 103
7. If, as a consequence of a court judgment or 10. If you wish to incorporate parts of the Program into allegation of patent infringement or for any other reason other free programs whose distribution conditions are (not limited to patent issues), conditions are imposed on different, write to the author to ask for permission.
Page 104
How to Apply These Terms to Your with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this New Programs License. GNU GENERAL PUBLIC LICENSE If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone Version 3, 29 June 2007...
Some devices are designed to deny users access to To “convey” a work means any kind of propagation that install or run modified versions of the software inside enables other parties to make or receive copies. Mere them, although the manufacturer can do so. This is interaction with a user through a computer network, fundamentally incompatible with the aim of protecting with no transfer of a copy, is not conveying.
Page 106
The Corresponding Source for a work in source code You may charge any price or no price for each copy form is that same work. that you convey, and you may offer support or warranty protection for a fee. 2. Basic Permissions. 5.
Page 107
offer spare parts or customer support for that “Installation Information” for a User Product means any product model, to give anyone who possesses methods, procedures, authorization keys, or other the object code either (1) a copy of the information required to install and execute modified Corresponding Source for all the software in the versions of a covered work in that User Product from a product that is covered by this License, on a...
Page 108
Notwithstanding any other provision of this License, for However, if you cease all violation of this License, then material you add to a covered work, you may (if your license from a particular copyright holder is authorized by the copyright holders of that material) reinstated (a) provisionally, unless and until the copyright supplement the terms of this License with terms: holder explicitly and finally terminates your license, and...
Page 109
litigation (including a cross-claim or counterclaim in a A patent license is “discriminatory” if it does not include lawsuit) alleging that any patent claim is infringed by within the scope of its coverage, prohibits the exercise making, using, selling, offering for sale, or importing the of, or is conditioned on the non-exercise of one or more Program or any portion of it.
Page 110
and conditions either of that numbered version or of any END OF TERMS AND CONDITIONS later version published by the Free Software GNU LESSER GENERAL PUBLIC Foundation. If the Program does not specify a version LICENSE number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
Page 111
To protect each distributor, we want to make it very The precise terms and conditions for copying, clear that there is no warranty for the free library. Also, if distribution and modification follow. Pay close attention the library is modified by someone else and passed on, to the difference between a “work based on the library”...
Page 112
2. You may modify your copy or copies of the Library or Once this change is made in a given copy, it is any portion of it, thus forming a work based on the irreversible for that copy, so the ordinary GNU General Library, and copy and distribute such modifications or Public License applies to all subsequent copies and work under the terms of Section 1 above, provided that...
Page 113
the work for the customer’s own use and reverse 7. You may place library facilities that are a work based engineering for debugging such modifications. on the Library side-by-side in a single library together with other library facilities not covered by this License, You must give prominent notice with each copy of the and distribute such a combined library, provided that work that the Library is used in it and that the Library...
Page 114
If any portion of this section is held invalid or unenforceable EXPRESSED OR IMPLIED, INCLUDING, BUT NOT under any particular circumstance, the balance of the LIMITED TO, THE IMPLIED WARRANTIES OF section is intended to apply, and the section as a whole is MERCHANTABILITY AND FITNESS FOR A intended to apply in other circumstances.
write to the Free Software Foundation, Inc., 51 Franklin TORT (INCLUDING NEGLIGENCE OR OTHERWISE) Street, Fifth Floor, Boston, MA 02110-1301 USA Also ARISING IN ANY WAY OUT OF THE USE OF THIS add information on how to contact you by electronic SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY and paper mail.
Page 116
Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction This manual is the copyrighted material of Samsung Techwin Co., Ltd. and Samsung Techwin Co., Ltd. reserves all rights related to such copyright. This manual shall not be copied or reproduced without the express written permission of Samsung Techwin Co., Ltd.
Page 117
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Page 118
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefi eld Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungsv.com...