Table of Contents
Advertisement
44
RQT6035
or
Timer recording
3
Press [ENTER].
The timer recording setting screen appears which allows you
to confirm the program and make corrections if necessary.
After 14 seconds or
when you press [ENTER]
Repeat steps 1–3 to program other recordings.
4
Press [PROG/CHECK] or [RETURN].
The timer recording list disappears and the message "TURN
RECORDER OFF FOR TIMER RECORDING" is shown on
the television.
To put the unit on timer recording
A
standby
Press [
, POWER].
Ensure "
" lights on the unit's display.
Note
If the disc is protected or full, the unit switches to standby but does
not go to timer recording standby. Check the disc carefully.
Flexible recording mode (FR)
The unit automatically selects a recording rate between "XP" and
"EP" that will enable the recording to fit in the available recording
time on the disc with the best possible recording quality.
You can use the mode only with timer recording.
It may not be possible to record to the finish of the program if the
remaining time doesn't allow.
Note
The built-in clock employs 12-hour system.
The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plus+.
"Invalid Entry" is displayed when you enter the wrong code. Reenter
the code.
"All timer programs are occupied." is displayed if there are already
16 items programmed. Clear unnecessary items (
The remaining time displayed is calculated based on the current
recording mode.
Approximately 30 seconds at the beginning of subsequent pro-
grams is not recorded when you use timer recording to record mul-
tiple programs to a DVD-R.
Recording is not possible unless you set "Disc Protection" in "DISC
SETTING" to "Off" (
page 53).
You can not record to a disc if the disc is protected with the write-
protect tab. Release this before operation (
Timer recording may not work as set when summer time switches
to winter time and vice versa (
The mode shown
on the unit's
display is selected.
If the current mode
is XP, it switches to
FR to record the
best possible
picture quality.
To change the
mode
page 45
The timer
recording list
appears.
!?
page 47).
RAM
page 99).
RAM
page 88).
Advertisement
Table of Contents
