Table of Contents
Advertisement
46
RQT6035
Timer recording
Manually programming the
unit to make timer recording
RAM DVD-R
You can set your own programming conditions (up to 16 programs).
Preparation
Switch [DVD, TV] to "DVD".
Ensure that this unit's clock is set correctly.
Insert a disc for recording (make sure there is enough room for the
program you are going to record plus a little extra).
1
Press [PROG/CHECK].
The timer recording list appears.
A line that is ready for programming is highlighted.
2
Press [ENTER].
The timer recording setting screen appears.
3
Use the joystick [
the items and change the items with
the joystick [ ,
The current settings are shown each time you press [
CHANNEL (Channel number and caption)
!?
DATE
Current date--- the day before one month later
DAILY SUN-SAT DAILY MON-SAT DAILY MON-FRI
WEEKLY SUN--- WEEKLY SAT
ON (Start time)/OFF (Finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
MODE (Recording mode)
SP XP FR EP LP
(SP, XP, EP and LP
page 26, FR
4
Press [ENTER] when you have
finished programming the timer.
The timer recording list reappears.
TOP
] to move through
].
].
page 47)
Advertisement
Table of Contents
