Specifications - Stihl FSA 120.0 R Instruction Manual

English
Fault LEDs on the
battery
The power levels
cannot be set.
The mowing
head cannot be
removed by
hand.
STIHL connected
app is unable to
find the battery
with .
20.2 Product Support and Assis‐
tance on Use
Product support and assistance on use are avail‐
able from STIHL servicing dealers.
For contacts and other information, please visit
https://support.stihl.com or www.stihl.com.

21 Specifications

21.1 STIHL FSA 120.0 R Brushcut‐
ters
– Permitted batteries:
– STIHL AP
– STIHL AR
– Weight without battery, cutting attachment and
deflector: 4.3 kg
– Length without cutting attachment: 1788 mm
– Degree of protection: IPX4 (protection against
splash water from any direction)
For runtime, see www.stihl.com/battery-life.
21.2 STIHL AP battery
– Battery technology: lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
®
– Bluetooth radio interface (only for batteries
with ):
– Data connection: Bluetooth
mobile appliance must be compatible with
®
Bluetooth Low Energy 5.0 and support
Generic Access Profile (GAP).
– Frequency band: ISM band 2.4 GHz
– Maximum RF power transmitted: 1 mW
20
Cause
The trigger is pressed
and the brushcutter is
switched on.
The mowing head is
overtightened.
®
Bluetooth interface
on the battery or
mobile device is deac‐
tivated.
The distance between
the battery and mobile
device is too great.
®
5.1. The
Remedy
► Select the power level as described in
this User Manual.
► Block the fanwheel with the stop pin.
► Unscrew the mowing head by hand.
► Remove the stop pin.
► Activate Bluetooth
tery or mobile device.
► Reduce the distance,
► If the battery still cannot be found with
the STIHL connected app: Contact a
STIHL authorized dealer for assistance.
– Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile terminal. Signal range can
vary greatly depending on local conditions,
including the receiver. The range may be
perceptibly reduced inside enclosed rooms
and through metal barriers (such as walls,
shelves or cases).
– Mobile appliance operating system require‐
ments: Android or iOS (current version or
higher)
21.3 Temperature limits
WARNING
■ The battery is not protected against all ambi‐
ent conditions. If the battery is exposed to cer‐
tain environmental conditions, it may catch fire
or explode. This may result in serious injury to
people and damage to property.
► Do not charge the battery below -20°C or
above 50°C.
► Do not use the brushcutter or battery below
-20°C or above 50°C.
► Do not store the brushcutter or battery
below -20°C or above 70°C.
21.4 Recommended temperature
ranges
For optimum performance of the brushcutter and
battery, note the following temperature ranges:
– Charging: 5°C to 40°C
– Use: - 10 °C to + 40 °C
– Storage: - 20 °C to + 50 °C
If the battery is charged, used or stored outside
the recommended temperature ranges, perform‐
ance may be restricted.
21 Specifications
®
interface on the bat‐
21.1.
0458-029-0101-A