Setting Channel Priority (Conventional Channels Only) - Uniden BC246T Owner's Manual

Hints:
• Each channel name can be up to 16 characters.
Abbreviate as necessary to fit.
• The channel name appears on the second line of the
display when the scanner stops on a channel.
• If you do not enter a channel name, the scanner
displays the frequency (for conventional systems) or
the talk group ID (for trunked systems) when it stops
on a channel.
• Press
• Press
• Channel names take up extra memory. To maximize
channels, use channel names only where necessary.
Setting Channel Priority
(Conventional Channels Only)
program system
Menu
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Priority
This setting controls whether the scanner treats the
channel as a priority channel while scanning. Select your
setting, then press E.
On - when you turn on the Priority feature, the channel will
be scanned every 2 seconds. P appears at the end of the
default name.
Off - the channel will not be treated with priority.
Note: The default setting is Off.
Programming/Editing Optional Settings
twice to delete the current character.
three times to clear the entire alpha tag.
E
E
E
E
E
E
E
74