Setting Channel Priority (Conventional Channels Only) - Uniden BC246T Owner's Manual

Hints:
• Each channel name can be up to 16 characters.
Abbreviate as necessary to fit.
• The channel name appears on the second line of the
display when the scanner stops on a channel.
• If you do not enter a channel name, the scanner
displays the frequency (for conventional systems) or
the talk group ID (for trunked systems) when it stops
on a channel.
• Press twice to delete the current character.
• Press three times to clear the entire alpha tag.
• Channel names take up extra memory. To maximize
channels, use channel names only where necessary.
Setting Channel Priority
(Conventional Channels Only)
program system
Menu
Select the system
Edit Group
E
Select the group
Edit Channel
E
Select the channel
Set Priority
E
This setting controls whether the scanner treats the
channel as a priority channel while scanning. Select your
setting, then press E.
On - when you turn on the Priority feature, the channel will
be scanned every 2 seconds. P appears at the end of the
default name.
Off - the channel will not be treated with priority.
Note: The default setting is Off.
Programming/Editing Optional Settings
E
E
E
E
74