System Frequencies; Fleet Map (Type I Or Type I/Type Ii Hybrid Only); Band Plan (Vhf Or Uhf Only); Group Name And Quick Key - Uniden BC246T Owner's Manual

• Type 2 UHF. The supplied frequencies are between
406 MHz and 512 MHz. No fleet map is supplied for
this type of system.
• Type 2 VHF. The supplied frequencies are between
136 MHz and 174 MHz. No fleet map is supplied for
this type of system.

System Frequencies

Enter the frequencies used by the system. Motorola
systems can use up to 28 frequencies. Place an asterisk
or other mark next to frequencies identified as data
channels.
Fleet Map (Type I or Type I/Type II Hybrid
Only)
Fill in the fleet map used by this agency.

Band Plan (VHF or UHF Only)

A band plan is required so the scanner can correctly
determine the voice channel frequency. Fill in the band
plan used by this agency, consisting of:
• Base frequency
• Step frequency
• Channel offset
You can enter up to three band plans.

Group Name and Quick Key

Each "Motorola System Worksheet 2" documents the
settings for one channel group within a system. If you
have fewer channels in the group than fits on the page,
you can skip a line and enter an additional group of
channels (enter the group information in the line you
skipped). If you have more channels for the group than
will fit on the page, use additional pages.
Fill in the key you want to press with
activate/deactivate the channel group. You can assign the
same quick key to multiple groups within a system.
Func
112
to quickly
Planning