Entering/Editing Edacs Channels; Programming Ltr Systems - Uniden BC246T Owner's Manual

• See "Entering/Editing the Group Name" on Page 71
• See "Setting the Group Quick Key" on Page 72
• See "Deleting Groups" on Page 73
• See "Editing the Channel Name" on Page 73
• See "Setting Group Lockout" on Page 72

Entering/Editing EDACS Channels

Edit Channel
NEW Channel
Enter the talk group ID for the channel, then press E.
Notes:
• If you have selected to use AFS format for talk group
ID's (the default), press
• To enter an I-Call ID, press
• If you omit the fleet and/or subfleet, the scanner
treats these fields as wildcards.
Note: Press
Then, refer to the appropriate section to change a
channel setting:
• See "Editing the Channel Name" on Page 73
• See "Setting Channel Alert" on Page 75
• See "Setting Channel Lockout" on Page 78
• See "Deleting Channels" on Page 78
• See "Copying/Pasting Channels" on Page 79
To program another channel within the same group, press
, then repeat the above. To create another channel
Menu
group and enter more channels, press
then proceed from "Entering/Editing EDACS Channel
Groups" on Page 59.

Programming LTR Systems

Program SysteM
Menu
New System
E
Confirm?
E
E
to enter a hyphen.
E
LT
E
Programming Radio Systems
Input TGID
to enter a hyphen.
, then enter the ID.
Menu
E
60
three times,