Edit Sys Option
Set Quick Key
After selecting this option, press 0-9 to assign the system
to a quick key or press No to assign the system to no
quick key, then press E.
Hints:
• You can assign as many systems to the same quick
key as you want.
• Preprogrammed systems are set to quick key 9.
• To be scanned, a system's quick key must be
activated and the system must be unlocked.
Setting System Lockout
program system
Menu
Select the system
Edit Sys Option
Set Lockout
This setting controls whether the system is scanned when
its quick key is enabled. Rotate the scroll control to select
your setting, then press E.
Locked - the system is not scanned
Unlocked - the system is scanned
Note: You can also lock or unlock a system by pressing
, selecting the system, then pressing
Func
Setting the System Hold Time
program system
Menu
Select the system
Edit Sys Option
Set Hold Time
This setting controls how many seconds the scanner
scans a system before moving to the next unlocked
system. Enter a value from 0-255, then press E to save
the setting.
Programming/Editing Optional Settings
E
E
E
E
E
E
E
E
64
E
E
+ L/O.
Func