Installing The Access Point; Unpacking The Package; Package Contents - Cisco Catalyst Wireless 9163E Manual

Installing the Access Point

Installing an AP involves the following high-level tasks:
•
•
•
•

Unpacking the Package

Package Contents

Each AP package contains the following items:
• One CW9163E Outdoor AP
• Ground lug and screws with lock washers
• MA-MNT-MR-16 mounting plate
• Grounding kit
• CAT 5e RJ45 Ethernet port termination plug
Note
• Weatherization tape and anticorrosion sealant
• Mounting straps
• Cisco product documentation and pointer card
Unpacking the Package, on page 11
Preparing the AP for Installation, on page 15
Performing a Preinstallation Configuration (Optional), on page 16
Mounting the Access Point, on page 18
The provided CAT 5e gland must be used with CAT 5e cable only. When using
CAT 6/6A cable, you need to use the AIR-ACC-CAT6= kit, which is an orderable
accessory from Cisco.
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
3
C H A P T E R
11