Table of Contents
Advertisement
Unpacking the Access Point
Unpacking the Access Point
To unpack the access point, follow these steps:
Step 1
Open the shipping container and carefully remove the contents.
Step 2
Return all packing materials to the shipping container, and save it.
Step 3
Ensure that all items listed in
or missing, notify your authorized Cisco sales representative.
Your shipment may also contain additional equipment as per your order, as listed in
Hardware From Cisco, page
For additional hardware that is required for installation, see
for Installation, page
Package Contents
Each access point package contains the following items:
•
•
•
•
•
•
Optional Tools and Hardware From Cisco
Depending on what you ordered, the following optional equipment may be part of your shipment:
•
•
•
•
•
•
Additional Tools and Hardware Required for Installation
You need to independently procure the following tools and materials which maybe required during
various stages of installing the AP:
•
•
Cisco Aironet 1540 Series Outdoor Access Point Hardware Installation Guide
2-2
"Package Contents"
2-2.
2-2.
One 1540 series access point
Ground lug and screws with lock washers
Plastic cable gland and rubber seal
Weatherization tape and anti-corrosion sealant
Cisco product documentation and pointer card
Wall/Pole mount bracket AIR-ACC1530-PMK1=
Power injector AIR-PWRINJ6=
Power injector AIR-PWRINJ5=
AP cover / Solar Shield for 1540, AIR-ACC1540-CVR=
Spare Parts kit containing extra cable glands, power connector, ground lug, etc.
AIR-PWRINJ-60RGD1=
Lightning Arrestor kit (AIR-ACC245LA-N=)
10 mm open end or box wrench
Ground lug crimping tool (Panduit CT-720 with CD-720-1 die)
Chapter 2
are included in the shipment. If any item is damaged
Additional Tools and Hardware Required
Installing the Access Point
Optional Tools and
Hide quick links:
Advertisement
Table of Contents
