Recording Motion Pictures - Panasonic SDR-H250EP Operating Instructions Manual

LSQT1210_EP(EN).book 35 ページ ２００７年２月９日 金曜日 午後６時０分

Recording motion pictures

This unit can be used for recording motion pictures to the internal HDD and an SD card. (l 15) Before
recording, use the menu to select the recording destination. (l below)
When the unit is turned on for the first time, the media select screen for recording motion pictures will
appear. Select [HDD] or [SD CARD] and press the joystick.
≥ When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a
wide-screen TV.
To watch images on a regular TV (4:3), change the aspect ratio setting (l 48) before recording the
images or when watching them on the connected TV (l 71).
≥ (SDR-H250) Open the lens cover before turning the unit on.
If the unit is turned on with the lens cover closed, the automatic white balance adjustment may not
function properly.
≥ (SDR-H20) Remove the lens cap before turning the unit on.
If the unit is turned on with the lens cap attached, the automatic white balance adjustment may not
function properly.
1
Turn the unit on.
2
Rotate the mode dial to select
3
Open the LCD monitor.
4
Press the MENU button, then select [MEDIA SELECT] # [HDD] or [SD
CARD] to select the recording destination and press the joystick.
5
Press the recording start/stop
button to start recording.
.
Recording
[HDD] [SD]
35
LSQT1210