Recording Motion Pictures - Panasonic SDR-T76 Operating Instructions Manual

Recording
2
Recording (Basic)
≥ Open the lens cover before turning the unit on. (l 10)
1
Change the mode to
open the LCD monitor.
2
Press the recording start/stop
button to start recording.
≥ When you begin recording, ; changes to ¥.
≥ While recording is in progress, the recording
will not stop even if the LCD monitor is closed.
3
Press the recording start/stop
button again to pause recording.
∫ Screen indications in the
motion picture recording mode
0h00m00s 0h00m00s 0h00m00s
SP
R 1h20m R 1h20m R 1h20m
A Recording mode
B Remaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
C Recording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset
to "0h00m00s".
("h" is an abbreviation for hour, "m" for
minute and "s" for second.)
38
VQT3J03
Recording motion
pictures
0h00m00s 0h00m00s 0h00m00s
1 20 1 20 20
SP
and
≥ Still pictures can be recorded while
recording the motion picture. (l 43)
≥ The images recorded between pressing
the recording start/stop button to start
recording and pressing it again to pause
recording become one scene.
The scene is automatically divided when
the recorded data exceeds 1.9 GB. (The
recording will continue.)
SD CARD
Maximum number of recordable scenes:
9801
Maximum number of different dates: 99
(l 63)
(In the case of SD cards it is the maximum
number of recordable scenes per card.)
Built-in Memory/HDD
SDR-T76 / SDR-H101
Maximum number of recordable scenes:
98901
Maximum number of different dates:
999 (l 63)
When either of them reaches to the
maximum limit, additional scenes cannot
be recorded.