1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent X-RADIATION, shock fire, or other hazards.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatic Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semi- conductor “chip”...
2.2. Service caution based on legal restrictions 2.2.1. General description about Lead Free Solder (PbF) The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation. The normal solder is the alloy of tin (Sn) and lead (Pb).
A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.
Note: The lithium battery is a critical component. (Type No.: ML-614S/DN Manufactured by Energy Company, Panasonic Corporation) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in equipment designed specifically for its use.
1. Schematic Diagram, Block Diagram and P.C.B. layout of Main P.C.B. 2. Parts List for individual parts of Main P.C.B. 2) The following category are recycle module part. Please send them to Central Repair Center. *Main P.C.B. (VEP03H83AM: SDR-H86PR/PU) (VEP03H83AN: SDR-H85P/PC/GT) (VEP03H83AP: SDR-H85EB/EC/EF/EG/EP) (VEP03H83AQ: SDR-H85EE/GA/GC/GK/GN, H95EE/GA/GC) (VEP03H83AR: SDR-H86EB)
3.2. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of SDR-H85/H86/H95, regardless of the colours. • a) SDR-H85P • b) SDR-H85PC • c) SDR-H85EB/EC/EF/EG/EP/GN, SDR-H86EB • d) SDR-H85EE, SDR-H95EE • e) SDR-H85GT • f ) SDR-H85GK •...
3.3. Precautions for Handling HDD 1. Handle HDD very carefully to prevent the static electricity and shock. 2. Set the HDD quickly after taking it out from the package. Make sure to put the HDD on buffer materials, etc. 3.3.1. Precautions at incoming process and for opening packages...
Page 13
3.3.3. Precautions for inserting and removing HDD FPC Make sure to use the tool (LSVQ0112) when locking and unlocking the lock lever of HDD FPC connector. Do not lock the lock lever without inserting HDD FPC. Otherwise, the connector may be damaged.
Page 14
Make sure to use the tool (LSVQ0112) when opening and closing the lock lever. *When install the HDD to main unit, necessary install the HDD FPC and HDD damper.
3.4. Formatting HDD When HDD is exchanged, format HDD as the procedure below. Without formatting, the error message appears on the LCD display when accessing HDD. <Formatting procedure> The Mode Switch to select Select [HDD] and press the joystick. Press the MENU button, then select [SETUP] →...
5 Location of Controls and Components Followings are the Location of Controls and Components for SDR-H85P/PC as a sample. For other models, refer to each Operating Instructions.
6 Service Mode 1. Indication method of the service menu Set the mode switch " Recording" mode. 2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi- tion for more than 3 seconds until the top screen of the Service Menu being displayed. Service mode menu Screen Contents...
6.1. HDD Self Check 1. Select [ 3 ] HDD self check. Operation specifications Indication contents • HDD self check result display Display the HDD self check result information. Displays other than "OK" are abnormalities of HDD. Push the menu button to end the service mode, and then POWER OFF. 6.2.
6.3. Power ON Self Check Result Display 1. Select [ 5 ] Power ON self check result display. Operation specifications Indication contents • Power ON self check result display Function to diagnose correct function of the device and interface between devices result display. Display the following communication test result.
8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart This flow chart indicates the disassembly steps the cabinet parts and P.C.B. Unit in order to access to be serviced. When reinstalling, perform the steps in the reverse order. 8.2. P.C.B. Layout Fig.
8.3. Disassembly Procedures Item / Part Fig. Removal (Screw, Connector, FPC. & Other) Flow-Chart for Disassembly Procedure 9 Side Case R/LCD Fig.D23 1-Screw (Q) Unit, Side Case R/LCD Unit Lens Unit Lens Unit Item / Part Fig. Removal (Screw, Connector, FPC.
Page 27
Note for replacing HDD 2) How to Attach • Be sure to use the tool when inserting and removing HDD Attach the HDD FPC to the new HDD using the tool. FPC. Attach the HDD Damper to the HDD. After replacing the HDD, be sure to format the new HDD. See “Formatting HDD”...
Page 29
Fig. D12 Note for attaching Speaker Angle Fig. D10 • Make sure that speaker wire is under Speaker Angle. Note for attaching Top Operation Unit • Top Operation Unit is installed and the following wire rod is a thing that becomes like Fig.D11. Fig.
8.4. Disassembly Procedures of Camera Lens Unit The following flowchart describes order or steps for removing the Camera lens unit and certain printed circuit boards in order to make access to the item needing service. To reassemble the unit follow the steps in reverse order. Fig.
Page 35
8.4.1. How to use of CCD positioning pin (RFKZ0476)
9 Measurements and Adjustments 9.1. EEPROM Data for spare parts of the MAIN P.C.B. After replacing the MAIN P.C.B., be sure to achieve adjustment. As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software. The adjustment instruction is available at “Software download” on the “Support Information from NWBG/VDBG-AVC” web-site in “TSN System”.
Page 37
9.2.2. Checking and repairing individual circuit boards except module parts (Main P.C.B.) How to use extension cables.
9.4. Electrical Adjustment • Adjustment method is different from a conventional SD/HDD video camera. • An exclusive jig and PC (including software for adjustment “tatsujin“) are necessary for electric adjustment. • A USB driver for service is necessary to communication with PC. •...
Page 40
Adjustment Items • Adjustment item as follows. The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in "TSN System". • How to use the software. Please reference help of the TATSUJIN software. Set-up manual for SD/HDD Video Camera 1.
10 Maintenance 10.1. Cleaning Lens and LCD Panel Do not touch the surface of the lens and LCD Panel with your hand. When cleaning the lens, use air-Blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface. Note: A lens cleaning paper and lens cleaner are available at local camera shops and market place.
11 Factory Setting 11.1. How to turn on the factory setting? 1. Indication method of the service menu Set the mode switch " Recording" mode. 2. While keep pressing the "Intelligent auto/Manual" button and "Menu" button, hold left the Zoom Lever towards to "[ W ]" posi- tion for more than 3 seconds until the top screen of the Service Menu being displayed.
Page 43
Circuit name being connected. Vol. 1 Colour (K)..Black Type (except SDR-H86EB) This signal is connected OFTR (S)..Silver Type (only SDR-H85P/EC/EE/EG/EP/GA/GC/GK, H86PU) to the FEP schematic diagram. (A)..Blue Type (only SDR-H85P/PC/GT) (R)..Red Type (only SDR-H85PC/EC/EF/EG/EP/GA/GC/GK/GT, H86PU) (H)..Gray Type (only SDR-H86EB) Name of Signal Table of contents S1.
S2. Voltage Chart Note) Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester. S2.1.
S6. Replacement Parts List Note: 1.* Be sure to make your orders of replacement parts according to this list. 2. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. 3.
Page 64
SDR-H85EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP02584A REAR P.C.B. 1 (RTL) E.S.D. VEP26326A MONITOR P.C.B. (RTL) E.S.D. VEP21310A DC BATT OP FPC 1 (RTL) E.S.D. VEP26326A MONITOR P.C.B. 1 (RTL) E.S.D.
Page 65
SDR-H85EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks XQN16+B4FJK SCREW VEP02584A REAR P.C.B. 1 (RTL) E.S.D. XQN16+B4FJK SCREW LSKF0753 REAR COVER XQN16+B4FJK SCREW LSGK1050 FRONT CASE 1 (-K,-H) XQN16+B4FJK SCREW LSGK1042 FRONT CASE 1 (-S,-R,-A)
Page 66
SDR-H85EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks LSKM1982 LCD CASE B LSGU0776 LCD OPERATION BUTTON LSGU0776 LCD OPERATION BUTTON LSSC1107 LCD SHIELD CASE LSYK2868 LCD U VEP26326A MONITOR P.C.B. 1 (RTL) E.S.D.
Page 67
SDR-H85EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks LSXN0061 LENS U 401-1 L6HA66NB0011 ZOOM MOTOR UNIT 401-2 L6HA66NB0012 FOCUS MOTOR UNIT 401-3 LSEM0118 AUTO IRIS UNIT VEP22409A CCD P.C.B. 1 E.S.D. LSDW0141 CCD CASE LSFL0343...
Page 68
SDR-H85EG-K vol.1 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VQT2L18 1 H85GT VYQ5309 PACKING CASE U 1 H85EGS,ECS,EES,EPS,GAS CHINESE(TRADITIONAL) VYQ5315 PACKING CASE U 1 H85EGR,ECR,EFR,EPR,GAR VQT2L14 1 H85P,PC VYQ5183 PACKING CASE U 1 H85GKK ENGLISH VYQ5310...