Advanced settings
The factory setting of the Burnout mode is High.
Factory setting
15.4.2 Modbus hardware setting
1. Switch off power supply.
Switch settings
2. Loosen the locking screw by turning it clockwise with an Allen wrench (size: 3.0).
3. Unscrew display cover from transmitter housing.
SW1-1 position
System configuration and operation
Burnout mode
High
Low
A5E52748387-AA, 2023/09
FC7x0
Output value if Burnout
in mA
21.6
2.4
137 / 180