FC7x0
System configuration and operation
Status
icon
Status icons HART
Status icons
Modbus,
PROFIBUS PA
For status icon placement on the display see figure at Display, No. 1, 2 or 5.
List of measured quantity abbreviations and identification on the display
Measured quantities
and identifications
Tab. 38: Regular display
Abbreviation
MFL
DNS
TMP
VFL
RFD
RLD
CVF
PRS
TT1 – TT6
TAG
LTG
VEL
CNC
NM1, NM2
132 / 180
Description
Upload parameter enabled
Total health result: good
(only indicated when display total
health result is active)
Total health result: bad state
(only indicated when display total
health result is active)
Tube Health Check with result:
warning
Stop batch
Batch running
Total health result: good
(only indicated when display total
health result is active)
Total health result: bad state
(only indicated when display total
health result is active)
Tube Health Check with result:
warning
Measured quantity or identification
Mass flow
Density
Temperature
Volume flow
Reference density
Relative density
Corrected volume flow
Pressure
Totalizer 1 – 6
Customer-Device identification
Customer-Device identification, long version
Velocity
Concentration
Net mass flow rate 1, 2
A5E52748387-AA, 2023/09
Status
Description
icon
Download parameter enabled
Total health result: warning
(only indicated when display total
health result is active)
Tube Health Check with result: OK
Tube Health Check with result:
error
Resume batch
SIL mode
Total health result: warning
(only indicated when display total
health result is active)
Tube Health Check with result: OK
Tube Health Check with result:
error
Display