Operating Position; Removing The Shutter Lockout Pins; Lifting Points - Riello DB6 SE C03 TC FS1 FGR T250 Installation, Use And Maintenance Instructions

5.4

Operating position

➤ The burner is set up to work only in positions
1 and 2 (Fig. 11).
➤ Installation 1 is preferable, as it is the only
one that allows the maintenance operations
WARNING
as described in this manual.
➤ The installation 2 permits the operation, but
makes maintenance and inspection opera-
tions of the combustion head more difficult.
1
20125458
5.5

Removing the shutter lockout pins

Remove the pins 1)-2) and nuts before fitting the burner onto the
boiler (Fig. 12).
Replace them with the screws 3) M12x16 supplied as standard.
5.6

Lifting points

Prepare a suitable lifting system using the rings
shown in Fig. 13.
20124993
Installation
2 3
20125459
16 GB
➤ Any other position could compromise the cor-
rect operation of the appliance.
➤ Installation 3, 4 and 5 is prohibited for safety
reasons.
DANGER
4
1
2
2
1
5
Fig. 11
3
D12015
3
Fig. 12
Fig. 13