6.4
Operating position
The burner is set up to work only in positions
1 and 4 (Fig. 13).
Installation 1 is preferable, as it is the only
WARNING
one that allows the maintenance operations
as described in this manual.
The installation 4 permits the operation, but
makes maintenance and inspection opera-
tions of the combustion head more difficult.
Any other position could compromise the cor-
rect operation of the appliance.
Installation 5 is prohibited for safety reasons.
DANGER
6.5
Removing the shutter lockout screws
Remove the screws 1)-2) and nuts before fitting the burner onto
the boiler (Fig. 14). Replace them with the screws 3) M8x20 sup-
plied as standard.
6.6
Lifting points
Prepare a suitable lifting system using the rings
shown in Fig. 15.
Installation
1
S9335
1
2
2
1
20111252
20112486
17
GB
2
3
4
3
3
5
Fig. 13
Fig. 14
Fig. 15
20111775