Unpacking The Device - Siemens SIMATIC NET RUGGEDCOM MX5000RE Equipment Manual

6.
7.
8.
9.
10. Install the fan tray.
11. Install the patch panels.
12. Connect network cables to the patch panels.
13. Install the front panel.
14. Mount the RUGGEDCOM MX5000RE.
15. Connect power to the device and ground the device to safety Earth.
16. Secure all wires.
17. Connect the device to the network.
18. Configure the device.
2.2

Unpacking the device

When unpacking the device, do the following:
1.
RUGGEDCOM MX5000RE
Equipment Manual, 11/2023, C79000-G8976-1060-17
Install the fan tray cables.
For more information, refer to "Installing the Fan Tray Cables" (Page 22).
Install the mounting brackets.
For more information, refer to "Installing the Mounting Brackets" (Page 24).
Install the EMI gaskets.
For more information, refer to "Installing the EMI Gaskets" (Page 25).
Assemble the RUGGEDCOM MX5000 with the enclosure.
For more information, refer to "Assembling the RUGGEDCOM MX5000 and
RUGGEDCOM MX5000RE" (Page 27).
For more information, refer to "Installing the Fan Tray" (Page 28).
For more information, refer to "Installing the Patch Panels" (Page 30).
For more information, refer to "Connecting the Network Cables" (Page 32).
For more information, refer to "Installing the Front Panel" (Page 32).
For more information, refer to "Mounting the RUGGEDCOM
MX5000RE" (Page 33).
For more information, refer to "Connecting Power to the
Enclosure" (Page 39).
Secure all wires from the terminal blocks so they cannot be disturbed by casual
contact. For example, in rack mount installations, use tie wraps to secure the
wires to the rack.
For more information, refer to "Communication ports" (Page 41).
For more information, refer to "Configuring the Device" (Page 49).
Inspect the package for damage before opening it.
Installing the Device
2.2 Unpacking the device
17