Siemens SIMATIC NET RUGGEDCOM MX5000RE Equipment Manual page 55

Communication ports
3.2 SFP transceivers
Installation/removal
For instructions on how to install and remove SFP transceivers, refer
to the
support.industry.siemens.com/cs/ww/en/ps/21322/man].
Replacement/exchange during operation
ROX supports replacing and exchanging SFP transceivers while the device is in
operation.
After you have replaced an SFP transceiver with another SFP transceiver of the same
or a different type, the new SFP transceiver is automatically configured in such a
way that it works in the same operating state as the previous SFP transceiver.
When replacing a plug-in transceiver, the parts of the configuration that are not
suitable for the new plug-in transceiver (e.g. auto-negotiation) are reset to their
default settings.
46
"RUGGEDCOM SFP Transceivers Reference Manual" [https://
NOTICE
RUGGEDCOM MX5000RE
Equipment Manual, 11/2023, C79000-G8976-1060-17