Vertical Desktop Feature - Gateway E-1400 System Manual

Vertical desktop feature

You can set up your desktop to sit vertically by using a stand included with
your accessory kit. This setup saves space and transforms your desktop into
a minitower computer. See the illustrated instructions included with your
accessory kit or the illustration below for more information.
Groove for
foot
Important
To convert your computer to a tower
1
Turn off the computer and disconnect the power cord and all cables
connected to the back.
2
Lift the right side of the computer until it rests vertically on its left side.
3
Lift the front of the computer by pushing on the top front, rocking it
back, and place the plastic foot in the grooves provided for that purpose.
4
Lower the front of the computer, allowing it to balance on the foot.
5
Reconnect the power cord and cables you disconnected.
4
System Features
If you set your system up vertically, be sure to use a
CD-ROM drive with retaining clips. You can use these clips
to hold the CD-ROM in place when using the vertical
desktop feature. The CD-ROM drive that ships with your
system includes these clips.