Outlet Sockets (S) For Single Phase Option - Atlas Copco QAS 14 Kd S5 ESF Instruction Manual

Circuit breaker Q1 does not only
!
interrupt the power supply towards
X1, but also towards X3, X4 and X5.
Make sure to switch on circuit
breakers Q1, Q4 and Q5 after
starting the generator when power is
supplied by means of X3, X4 or X5.
9.3.5 Outlet sockets (S) for Single
phase option
A brief description of all outlet sockets and circuit
breakers provided on the generator is given hereafter:
X2 ....... 1-phase outlet socket (230 V AC)
Provides phase L, neutral and earthing.
X3 ....... 1-phase outlet socket (230 V AC)
Provides phase L, neutral and earthing.
X5 ....... 1-phase outlet socket (230 V AC)
Provides phase L, neutral and earthing.
Q3 ....... Circuit breaker for X3
Interrupts the power supply to X3 when a
short-circuit occurs at the load side, or when
the overcurrent protection
activated. When tripped, Q3 interrupts phase
L and the neutral towards X3. It can be reset
after eliminating the problem.
Q5 ....... Circuit breaker for X5
Interrupts the power supply to X5 when a
short-circuit occurs at the load side, or when
the overcurrent protection
activated. When tripped, Q5 interrupts phase
L and the neutral towards X5. It can be reset
after eliminating the problem.
- 69 -
(32 A) is
Circuit breaker Q1 does not only
!
interrupt the power supply towards
X1, but also towards X2, X3 and X5.
Make sure to switch on circuit
breakers Q1, Q3 and Q5 after
starting the generator when power is
supplied by means of X2, X3 or X5.
(16 A) is