Atlas Copco QAS 14 Kd S5 ESF Instruction Manual page 33

2. Press the ENTER button to enter the parameter
setting.
3. Select the menu group with the ENTER button to
edit.
4. Enter the password.
5. Edit the set point value with the UP and DOWN
buttons and save the value by pressing the
ENTER button.
4.2.4.6 LOG list
The log is divided into three different lists:
– Event log: contains up to 50 events
– Alarm log: contains up to 30 historical alarm
– Battery test log: contains up to 52 historical
battery tests
An event is e.g. closing of breaker and starting of
engine. An alarm is e.g. overcurrent or high cooling
water temperature. A battery test is e.g. test OK or test
failed.
To enter the log list:
1. Enter the LOG MENU.
2. Select the required log list with the UP and
DOWN push-buttons and select with the ENTER
button.
3. To scroll up and down in the list, use the UP and
DOWN buttons.
1 Date and time of the event
2 Event
3 Event number
- 33 -