Display
TART RELAY ON
S
START RELAY OFF
Hz/V OK IN ###s
COOLING DOWN ###s
COOLING DOWN
GENSET STOPPING
EXT. STOP TIME ###s
The start relay is activated
The start relay is deactivated during the start sequence
The voltage and frequency on the genset is OK. When the timer runs out it is allowed to operate the generator breaker.
Cooling down period is activated.
Cooling down period is activated and infinite. Cooling down timer is set to 0.0 s.
This info is shown when cooling down has finished.
Extended stop time. The unit will stop after a pre-programmed time of x.x s. after having received a stop signal.
- 31 -
Description