Set Wav File Or Message Properties, Save, And Exit - Crestron TPS-TPI Operation Manual

Crestron Isys™ TPS-TPI
Operations Guide - DOC. 5855

Set WAV File or Message Properties, Save, and Exit

NOTE: The following procedure assumes that Sound Recorder is open.
NOTE: Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To set the WAV file (or message) properties, save the file, and exit Sound Recorder,
perform the following procedure:
1. Select File | Properties as shown below.
Access File Properties
2. When the Properties for Sound dialog box opens, click on Convert
Now.
Access File Properties Conversion
Touchpanel Interface
Touchpanel Interface: Crestron Isys™ TPS-TPI • 31