To Record A Wav File Message - Crestron TPS-TPI Operation Manual

Touchpanel Interface
26 • Touchpanel Interface: Crestron Isys™ TPS-TPI

To Record a WAV File Message

NOTE: To record a WAV file, the PC must be equipped with audio capabilities
(i.e., a microphone-input jack, a microphone, multimedia speakers, and a recording
program such as Microsoft Sound Recorder). The examples in this appendix use
Sound Recorder. If another recording program is preferred, consult the
manufacturer's directions.
NOTE: Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To record a WAV file message, perform the following procedure:
1. At the Windows taskbar, select Start | Programs | Accessories. For
Windows 95/NT, select Multimedia, for Windows 98, select
Entertainment. Select Sound Recorder and the Sound Recorder
opens as shown below.
Open Sound Recorder
2. Select File | New as shown below.
Create New File to Record
3. Click on the
recording.
4. Proceed to "Set WAV File or Message Properties, Save, and Exit" on
page 31. To record another file, follow that procedure to step 9.
Crestron Isys™ TPS-TPI
button to begin recording and the
Operations Guide - DOC. 5855
button to stop