Diagnostics Menu; Setup Menu - Crestron TPS-TPI Operation Manual

Crestron Isys™ TPS-TPI
Operations Guide - DOC. 5855

Diagnostics Menu

The Diagnostics button from the Main Menu should only be used under supervision
from a Crestron technical support representative during telephone support. Most of
the options available from the Diagnostics Menu, shown after this paragraph, are
numeric in nature and their interpretation is beyond the scope of this manual.
Diagnostics Menu

Setup Menu

To obtain the Setup Menu, shown after this paragraph, select the Setup button from
the Main Menu. Display options (i.e., standby timeout, panel tracking, and Ethernet)
are available directly from the Setup Menu and are explained in the next three
paragraphs. Other setup parameters (i.e., interface, RS-232, audio, RGB, and video)
use additional menus and are detailed in subsequent paragraphs as well. After setup
parameters have been set, select the Return button to return to the Main Menu.
Setup Menu
NOTE: All display settings, except those menus with a Save and Return button,
are automatically saved in non-volatile memory.
Standby Timeout
The display can be turned off (standby mode) when not in active use. STANDBY
TIMEOUT, located toward the middle of the Setup Menu, can turn off the display
when it is inactive for a specified time frame (minutes, shown as XXX in the
illustration). When the display is activated, the last screen shown reappears. Minutes
Touchpanel Interface
Touchpanel Interface: Crestron Isys™ TPS-TPI • 9