Transmitting Stored Dtmf Numbers - Kenwood TH-22A Instruction Manual

m Transmitting Stored DTMF Numbers
34
To transmit a stored DTMF number, use the following
procedure:
1 Press [PTT] +[CALL] and continue holding [PTT]
down.
« The following display appears:
2 Enter the DTMF memory channel (1 to 5) that
contains the DTMF number to be transmitted.
* The stored DTMF digits are displayed as they
are transmitted.
e® Transmission continues until all digits are sent.
Releasing [PTT] will not interrupt the digits being
sent or stop transmission.
e Selecting a DTMF memory channel that has no
DTMF number stored causes the previous
display to be restored.
mw Activating DTMF Transmit Hold
It's easier to enter a long string of digits if you don't
have to hold down [PTT] while entering the digits.
Your transceiver remains in the transmit state for 2
seconds after pressing each key when this function is
activated.
1
Press [CALL] + POWER ON to enter Menu
Set-up.
Turn the ENC/SQL control to select Menu No. 09.
e The current Transmit Hold status appears.
e The default is "OFF".
Press [CALL] to select "OFF" or "ON".
® OFF: Disables Transmit Hold.
e ON: Enables Transmit Hold.
Press any key other than [CALL], [LAMP], or
[MONI] to exit Menu Set-up.