Table of Contents
Advertisement
5.
If it is necessary to remove the ambient light sensor board, disconnect the cable from the board (1), lift
upward to disengage the board from the adhesive on the display enclosure (2), and then remove the
board from the display (3).
The ambient light sensor board is available using spare part number L15511-001.
6.
If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips M2.0×2.0 screws
that secure the panel to the display enclosure.
7.
Rotate the display panel over onto the keyboard (1).
NOTE:
94
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
For additional details on removing the cable, see
Connector types on page
174.
Advertisement
Table of Contents
Troubleshooting
Related Manuals for HP ZBook 17 G5
Related Products for HP ZBook 17 G5
- HP 174381-002 - Deskpro EN - 6600 Model 10000
- HP 178900-004 - Deskpro EN - 6266 Model 3200
- HP 178910-009 - Deskpro EN - 6333 Model 4300 CDS
- HP 178920-007 - Deskpro EN - 6350X Model 6400
- HP 178930-002 - Deskpro EN - 6400X Model 6400 CDS
- HP 178930-005 - Deskpro EN - 32 MB RAM
- HP 178940-007 - Deskpro EN - DT 6450X Model 10000
- HP 178960-004 - Deskpro EN - 6300X Model 3200