HP ZBook 17 G5 Maintenance And Service Manual page 64

2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
3. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
module slot.
NOTE:
module and the socket labeled '1' houses the primary memory module. The removal procedure is the
same for both memory sockets.
Reverse this procedure to install a memory module.
52 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Memory modules are designed with a notch to prevent incorrect insertion into the memory
The computer uses two memory sockets. The socket labeled '2' houses the expansion memory