Cybersecurity-Relevant Information - Siemens SIMATIC ET 200MP Equipment Manual

Industrial cybersecurity

1.3 Cybersecurity-relevant information

1.3 Cybersecurity-relevant information
Observe all cybersecurity-relevant information.
Topics with cybersecurity-relevant information
Operational application environment and security assumptions
Requirements for the operational application environment of
the system and security assumptions
Security properties of the product
Access protection
Data integrity
Signed firmware update
Secure Boot
PROFINET Security Class 1
• The device supports PROFINET Security Class 1.
• With the introduction of PROFINET Security Class 1, addi-
tional security settings have been integrated into the
PROFINET communication.
Supported Ethernet services
Interfaces, ports, protocols and services
Information on the following is security-relevant:
• Communication layer and communication role
• Default states
• Enabling/disabling of ports and services
Secure operation
Recommendations for safe operation
8
Reference
This section is found in the System Manual
(https://support.industry.siemens.com/cs/ww/en/view/59191
792).
Note the information on the topic of access protection in the
"Protection" section of the System Manual
(https://support.industry.siemens.com/cs/ww/en/view/59191
792).
The topic of data integrity is described in the "Industrial cy-
bersecurity" section of the System Manual
(https://support.industry.siemens.com/cs/ww/en/view/59191
792).
The topic of signed firmware updates is described in the
"Industrial cybersecurity" section of the System Manual
(https://support.industry.siemens.com/cs/ww/en/view/59191
792).
The topic of secure boot is described in the "Industrial cyber-
security" section of the System Manual
(https://support.industry.siemens.com/cs/ww/en/view/59191
792).
Detailed information about PROFINET Security Class 1 and
the additional security settings can be found in the PROFINET
with STEP 7 Function Manual
(https://support.industry.siemens.com/cs/us/en/view/499488
56)
You can find information on supported services in the Tech-
nical specifications (Page 63) section.
You can find detailed information on supported Ethernet
services in the Communication Function Manual
(https://support.industry.siemens.com/cs/us/en/view/591929
25).
You can find detailed information on these topics in
the Communication Function Manual
(https://support.industry.siemens.com/cs/us/en/view/591929
25).
Cross-system information on the safe operation of interface
modules can be found in the System Manual
(https://support.industry.siemens.com/cs/ww/en/view/59191
792).
Interface module IM 155-5 MF HF (6ES7155-5MU00-0CN0)
Equipment Manual, 11/2023, A5E53268530-AA