Programmable Multiband Amplifier
TMB 100 ¤ TMB 100S
Setting the levels.
There are three types of level setting:
"Manual" setting of output levels (Gain menu)
automatic alignment of UHF filter output levels to a value entered by the user. (Auto menu,
sub-menu Level)
automatic UHF gain control (Menu Auto, sub-menu AGC)
Unit in standby mode, push a button to reach the CONFIG menu.
Press the button several times to reach the Gain menu.
Press enter to activate the menu
Press the or button to setup the VHF, UHF or Filter gain
Confirm by pressing enter
Press the buttons + or - to change the value
Confirm by pressing enter
Press the or button to setup the next gain
< GAIN >
Enter
Notice:
The number of filter is according to the on/off filter setting
GAIN
GAIN
1P
off
UHF 20
< GAIN >
nP
off / 0..20
Enter
GAIN
UHF
Enter
Enter
14
GAIN
VHF 20
Enter
GAIN
0..20
VHF
0..20
Enter
GAIN
FM 20
Enter
GAIN
FM
0..20
Enter