Agc; Auto Level - Triax TMB 100S Mounting Instruction

Programmable Multiband Amplifier
TMB 100 ¤ TMB 100S

AGC


Unit in standby mode, push a button to reach the CONFIG menu.

Press the  button several times to reach the Auto/AGC menu.

Press enter to activate the AGC menu

Press the buttons + or - to change the value

Confirm by pressing enter

Press the buttons + or - to change the value

Confirm by pressing enter

Auto level


Unit in standby mode, push a button to reach the CONFIG menu.

Press the  button several times to reach the Auto/Level menu.

Press enter to activate the Level menu

Press the buttons + or - to change the value

Confirm by pressing enter

Press the buttons + or - to change the value

Confirm by pressing enter
< AUTO >
Enter
IMPORTANT!

AGC: The unit memorizes the average output level. A variation of ± 1 dB triggers the
function and compensates the variation within gain and attenuation limits

AGC mode hides all other menus. To modify the parameters, switch the AGC mode to OFF

Auto Level: The unit memorizes the selected output level, the function try to reach the value
within input, gain and attenuation limits.
Note: Setting of the levels BI-II / BIII is not automatic.
AUTO
AGC off Level 117
Enter
AUTO
AGC off/on Level
Enter
LevPx 6
15
AUTO
Enter
AUTO
117
Enter
AUTO
.