Pregrammable Amplifier
TMB 100, 100-1 & TMB 100S
Setting the levels.
There are three types of level setting:
"Manual" setting of output levels (Gain menu)
automatic alignment of UHF filter output levels to a value entered by the user. (Auto menu,
sub-menu Level)
automatic UHF gain control (Menu Auto, sub-menu AGC)
Unit in standby mode, push a button to reach the CONFIG menu.
Press the button several times to reach the Gain menu.
Press enter to activate the menu
Press the or button to setup the VHF, UHF or Filter gain
Confirm by pressing enter
Press the buttons + or - to change the value
Confirm by pressing enter
Press the or button to setup the next gain
Notice:
The number of filter is according to the on/off filter setting
AGC
Unit in standby mode, push a button to reach the CONFIG menu.
Press the button several times to reach the Auto/AGC menu.
Press enter to activate the AGC menu
Press the buttons + or - to change the value
Confirm by pressing enter
Press the buttons + or - to change the value
Confirm by pressing enter
Auto level
Unit in standby mode, push a button to reach the CONFIG menu.
Press the button several times to reach the Auto/Level menu.
Press enter to activate the Level menu
Press the buttons + or - to change the value
Confirm by pressing enter
Press the buttons + or - to change the value
Confirm by pressing enter