Removing The Right Fan - Dell NOT22422 Owner's Manual

About this task
CAUTION: The information in this installation section is intended for authorized service technicians only.
The following image indicates the location of the left fan and provides a visual representation of the installation procedure.
Steps
1. Align and place the left-fan onto the palm-rest assembly.
2. Replace the two (M2x4) screws to secure the left fan to the palm-rest assembly.
3. Connect the left fan cable to the connector on the system board.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

Removing the right fan

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the SD card.
3. Remove the base cover.
About this task
CAUTION: The information in this removal section is intended for authorized service technicians only.
The following images indicate the location of the right fan and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
Before working inside your
57