Dell NOT22422 Owner's Manual page 126

Table 37. System setup options—Connection menu (continued)
Connection
Dynamic Wireless Transmit Power
HTTPs Boot Feature
HTTPs Boot
HTTPs Boot Mode
Table 38. System setup options—Power menu
Power
Battery Configuration
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Peak Shift
Thermal Management
USB Wake Support
Wake on Dell USB-C Dock
Block Sleep
Lid Switch
Enable Lid Switch
Power On Lid Open
Upon disconnection from the wired network, the selected wireless radios are
re-enabled.
Default: OFF
By default, the option is enabled.
Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is enabled.
With Auto Mode, the HTTPs Boot extracts Boot URL from the DHCP. With
Manual Mode, the HTTPs Boot reads Boot URL from the user-provided data.
By default, the Auto Mode option is enabled.
Enables the computer to run on battery during power usage hours. Use the
below options to prevent AC power usage between certain times of each day.
By default Adaptive is selected.
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF
Enables the computer to run on battery during peak power usage hours.
Default: OFF
Sets cooling fan and processor heat management to adjust system
performance, noise, and temperature.
By default, Optimized is selected.
Enables connecting a Dell USB-C Dock to wake the computer from Standby,
Hibernate, or Power off.
Default: ON
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables or disables the lid switch.
Default: ON
Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON
BIOS Setup 125