Dell NOT22422 Owner's Manual page 129

Table 40. System setup options—Passwords menu (continued)
Passwords
Enable Allow Non-Admin PSID Revert
Table 41. System setup options—Update Recovery menu
Update Recovery
UEFI Capsule Firmware Updates
Enable UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
SupportAssist OS Recovery
BIOSConnect
BIOSConnect
Dell Auto OS Recovery Threshold
Table 42. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
128 BIOS Setup
Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.
By default, the option is disabled.
Controls whether this computer allows BIOS updates via EUFI capsule update
packages.
Default: ON
Enables the computer to recover from a bad BIOS image, as long as the Boot
Block portion is intact and functioning.
Default: ON
NOTE: BIOS recovery is designed to fix the main BIOS block and cannot
work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.
Controls flashing of the system firmware to previous revisions.
Default: ON
Enables or disables the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.
Default: ON
Enables or disables cloud Service OS recover if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option.
Default: ON
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery tool.
By default, 2 is selected.
Displays the Service Tag of the computer.
Creates a system Asset Tag that can be used by an IT administrator to
uniquely identify a particular system. Once set in BIOS, the Asset Tag cannot
be changed.
Enables the computer to turn on and go to boot when AC power is supplied to
the computer.
Default: OFF