Figure 23. Installing the base cover
Steps
1. Align and place the base cover on the palm-rest and keyboard assembly, and snap the base cover into place.
2. Tighten the six captive screws to secure the base cover to the system.
Next steps
1. Install the
nanoSIM-card
2. Follow the procedure in
Fan
Removing the right fan
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information, see step 6 in
computer.
2. Remove the
Nano-SIM card
3. Remove the
base
cover.
tray.
after working inside your
Before working inside your
tray.
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
Before working inside your
45