Panasonic DVD-CV50 Operating Instructions Manual page 45

DVD
AitemaUve soundtrack (or
subtitle) languages fail to be
selected.
Soundtrack and/or subtitle
language is not the one selected
at the initial settings.
Sound does not come from a
speaker.
The vocals cannot be turned off.
There are no vocals while playing
Karaoke DVD.
An aitemafive language is not selected with discs which do not contain more than one language.
In the case of some discs, the alternative language cannot be selected by operating the [AUDIO[ or
[SUBTITLE]. TP/selecting it from the disc's menu if one is available, •
If the soundtrack and/or subtitle language does not exist on the disc, the language selected at the
initial settings will not be seen/heard.
Check the connections. • _ _-_
If you have connected this unit to an amplifier through the audio output terminals, go to the initial
settings menu "8 Speaker Sefiing" and change the settings to suit your apsekem. Select "Yes" for all
the speakers you have connected. G
DVD-CV50 cannot decode DTS encoded discs. To enjoy DTS encoded discs, connect to an
amplifier that has a DTS Digital Surround decoder. •
If you have connected this unit to an amplifier (with built-in decoder) through the digital audio output
terminal, go to the initial settings menu =7 Digital Audio Output" and change the settings to
"Bitstraam" for "2 Dolby Digital_or "3 DTS Digital Surround'. •
Sound will only come from the two front speakers if V.S.S. is on. Turn V.S.S. off. •
You have selected an audio channel that includes a vocal channel. Read the disc's jacket to chcose
the correct channel. •
When you have connected this unit to other equipment through a DIGITAL AUDIO OUT terminal, go
to "7 Digital Audio Output" in the initial settings and change the setting for =2 Dolby Digital" to =PCM".
0000
Video CD
I No menu play. I This function works only for Video CDs with playback control,
When an error or trouble is detected dudng operation, a message appears in the FL display.
When a message has appeared, check the details given below.
Message Unit status Remedy
CHECK THE DISC Disc is dirty. Wipe the disc clean.
HN [] Trouble is likely to have occurred. The Press [POWER (_)/I] to switch the unit to the standby mode and
number following "H _differs depending on then back to ON. Aitemafively, press [POWER _)/I] to switch the
[] [] stands the status of the unit, unit to the standby mode, disconnect the AC power supply cord,
for a number, and then reconnect it.
• If the message fails to be cleared, even when remedial action is taken, ask a service technician to repair the unit.
m;
Do not attempt to remove the cover(s) or repair the unit yourself.
Refer servicing to qualified personnel only.
Product information ]
For product service, product information or assistance with product
operation, refer to the servicanter directory.
If you ship the product
Carefully pack and send it prepaid, adequately insurad and
preferably in the odginal carton, Attach a postage-affixed let-
ter, detailing the complaint, to the outside of the carton. DO
NOT send the product to the Executive or Regional Sales of-
fices. They are NOT equipped to make repairs.
RQT5455