Panasonic DVD-CV50 Operating Instructions Manual page 43

Front(L) Center Front(R]
],_g_/Small J._g_/Small/No J=_g_/Small
Exit -
Subwoofer
Surround (L) Surround (R)
rL_ggJSmall/No L_ggJSmall/No
• Undedined items are factory preset.
In case of surround speaker (L)
; I
No Large/Yes
ym
Small/Yes
Center delay time
Surround delay time
• Underlined items are factory preset.
;peaker pos_on
Idealsurround
speakerpesition
Place all _'our speakers within this circumference
Center
channelbalance (0_d_
Test signal.
"Subwoo_r
channel
balance
(_)
m
Surround (L) Surround (R)
channel balance (_;t_ channel balance ((__)
eUndedined items are factory preset.
Setting the size and p_cence of your
speakers
1. Prs_ the cureor buittons [A, V, q, I_] to solect the Item and
press [ENTER].
2. Pm..s the cursor buttons [A, V] to select the setting and
press [ENTER].
eLarge speaker icon
If the speaker supports low-frequency (under 100 Hz) reproduc-
tion.
• Small speaker icon
If the speaker does not support low-frequency reproduction.
elf you do not connect a subwoofer, it is preferable to connect front
speakers (L/R) capable of producing bass of less than 100Hz.
] Delay time
I
1, Press the cursor b_ [&, •, 41, I_] to select the item and
press [ENTER].
2. Prees the cureer buttons [&, _'] to adjust the dolay time and
press [ENTER].
• Center speaker
Set delay time to =0 ms" (factory preset) if DF is less than or
equal to De.
If Dv-Dc=
approx. 11/z feet (50 cm)
approx. 3 feet (100 cm)
approx. 5 feet (150 cm)
approx. 6 feet (200 cm)
• Surround speaker
then set to
1.3 ms
2.6 ms
3.9 ms
5.3 ms
Set delay time to "0 ms" (factory preset) if Dr and Ds are equal.
If D_-Ds= then setto
approx. 6 feet (200 cm) 5.3 ms
approx. 12 feet (400 cm) 10.6 ms
approx. 18 feet (606 cm) 15.9 ms
] Channel balance I
1. Press the cursor buttons [&, V, _1, Ib] to select "Test" and
press [ENTER].
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
FRONT(L)-_* CENTER-_* FRONT(R)
T
SURROUND(L)<- SURROUND(R)
2. While listening to the test signal, prmm the cursor buttons
[A, T] to adjust the volume of the cerrter and surround
speakers so they are the same apparent volume as the front
speakers. (The front speakers cannot he adjusted here.)
3. Prose [ENTER]. (The test signals are stopped.)
• No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to your taste.
RQT5455