Panasonic DVD-CV50 Operating Instructions Manual page 30

I
2-3
1
AC_ON
0 2 Ra#ngs LS_el 8 ="
all 3 Menu Language English
i 4 On-Screen Messages
5 FLDiS_olay Bright
lit 6 TV ASpect 4:3
_ _ 7 Digital A udioOutput
I__ s SpeakerSet_ng 2-channe_
9 OtherSettir_js
PressRETURNtoexit
Change the initial settings to suit your preference and to suit the unit
to the environment in which it is being used.
1
2
3
Press [ACTION] in the stop mode.
The initial settings screen is displayed.
Press the cursor buttons [&, V] to se-
lect the item and press [ENTER].
Each item that can be modified is displayed•
1 Disc Languages (-- page 31)
Change the soundtrack langunge, subtitle language and
the language used in the disc's menu to be used for every
disc played. •
2 Ratings (. page 32)
Change the ratings level to prevent play of discs, skip vio-
lent scenes, or replace scenes with others by entering a
password. This is also Called a parental Icok.
3 Menu Language (-0 page 33)
Change the language used for the on-screen displays and
initial settings menus•
4 On-Screen Messages (-, page 33)
Choose whether "Play", "Still" and other displays wilt be
displayed or not, and the colar and position of these dis-
plays as weft as On-Screen Menu Icons.
5 FL Display (m page 33)
Change the brightness for the FL display.
6 TV Aspect (o page 11)
Change the settings to suit the type of television you have
connected.
7 Digital Audio Output (-, page 40)
Change the settings to suit the type of digital equipment
you have connected.
8 Speaker Setting (-- page 42)
Change the settings to suit the type of speaker you have
connected.
90gter Settings (-. page 34)
Choose the kind of picture shown when play is paused,
and various other settings to enhance your viewing expe-
dence.
Press the cursor buttons [_, T] to se-
lect the setting and press [ENTER].
eSome items require additional steps.
(See the respective page.)
Setting is finished and the initial settings screen is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [ACTION] or [RETURN].
For your reference
eThe numedc buttons can also be used instead of the cursor buttons
[&, _] for selecting items or settings. Pressing [ENTER] is not nec-
essary.
RQT5455