Table of Contents
Advertisement
Product No.
3
Unit
Display type
Number of displays
Display color
Number of display digits
Operation light
4
Digital filter
Enclosure
Withstand voltage
Insulation resistance
Ambient temperature range
Operating humidity range
Standard
Length of lead wire with connector
1: Value without digital filter (at 0 ms).
2: If the applied pressure fluctuates around the set value, the hysteresis must be set to a value more than the amount of fluctuation or
chattering will occur.
3: This setting is only available for models with the units selection function. Only MPa or kPa is available for models without this function.
4: The response time indicates when the set value is 90% in relation to the step input.
5: Any products with tiny scratches, smears, or variations in the display color or brightness, which does not affect the performance of the
product, are verified as conforming products.
ZSE20B
(Vacuum pressure)
(Compound pressure)
2
MPa, kPa, kgf/cm
, bar, psi, InHg, mmHg
3-screen display (Main display, sub display x 2)
1) Main display: Red/Green
2) Sub display: Orange
Main display: 4 digits (7-segments)
Sub display: 4 digits (Upper 1 digit 11-segments, 7-segments for other)
LED is ON when switch output is ON (OUT1, OUT2: Orange)
0, 10, 50, 100, 500, 1000, 5000 ms
1000 VAC for 1 minute between terminals and housing
50 MΩ or more between terminals and housing (with 500 VDC megger)
Operation: -5 to 50
(No condensation or freezing)
Operation, Storage: 35 to 85%RH (No condensation)
UL/CSA(E216656), CE/UKCA marked
-84-
ZSE20BF
ISE20B
(Positive pressure)
MPa, kPa, kgf/cm
bar, psi
LCD
IP65
o
o
C, Storage: -10 to 60
C
2 m
No.PS※※-OMU0006-F
2
,
Advertisement
Table of Contents
