Connector attachment/detachment (M12 connector type)
●Tighten the connector by hand.
●Align the body connector key and the lead wire connector key groove to insert vertically.
●Turn the knurled part of the lead wire side connector clockwise.
●Connection is complete when the knurled part is fully tightened. Check that the connection is not loose.
○Connector pin No. (Body side)
Connector pin No.
1
2
3
4
-24-
Description
X, Y
R, S, T, V
DC(+)
OUT2
FUNC
DC(-)
OUT1
No.PS※※-OMU0006-F