Ricoh Pro C9500 Operator's Manual page 76

2. Paper Specifications and Adding Paper
5. Release the fence.
6. Load paper by aligning the paper with the left side of the paper tray.
Place paper with print side up.
Load a stack of paper about 5–10 mm (0.2–0.4 inches) high.
Make sure the paper rest on top of the supporting plates on both sides.
When you load paper that is 204 mm (8.04 inches) or smaller, remove the supporting plates from
the bottom of the paper tray.
1
1. Supporting plates
74
M0EBIM2124
M0EBIM2125
M0EBIM2126