Ricoh Pro C9500 Operator's Manual page 18

1. Getting Started
Low Power Mode (Standby for Printing Priority)
If you do not perform an operation for a specified period of time, the screen of the control panel
turns off while the main power indicator keeps flashing, and the machine enters the Low Power
mode (Standby for Printing Priority). In this state, the power consumption is lower than in the normal
standby mode.
• You can specify the time to wait before the machine enters the Low Power mode in [Low
Power Mode Timer].
See "Printer Settings", User Guide.
• When you touch the control panel screen while the machine is in the Low Power mode
(Standby for Printing Priority), the machine recovers from the Low Power mode (Standby for
Printing Priority) and displays the operation screen.
• In [Energy Saver Key to Change Mode], you can change the setting of the machine to enter
the Low Power mode (Standby for Printing Priority) when you press
See "Printer Settings", User Guide.
Low Power Mode (Energy Saving Priority)
If you do not operate the machine for a specified period of time, the machine emits a clicking
sound and enters the Low Power mode (Energy Saving Priority) while turning off the heater in the
fusing unit with the control panel displaying the operation screen. In this state, the power
consumption is constrained further compared to the Low Power mode (Standby for Printing Priority).
• To enable the Low Power mode (Energy Saving Priority), select [Energy Saving Priority] in
[Low Power Mode Entry]. You can specify the time the machine waits before entering the Low
Power mode in [Low Power Mode Timer].
See "Printer Settings", User Guide.
• Operations that do not involve printing, such as changing the machine settings from the
control panel, are executed while the machine remains in the Low Power mode (Energy
Saving Priority).
Sleep Mode
The control panel screen turns off, and the main power indicator flashes slowly. The machine
consumes the least energy in this mode. The machine enters the Sleep mode when no operation is
performed for a specified period of time, or when you press
• You can specify the time the machine waits before entering the Sleep Mode in [Sleep Mode
Timer].
See "Printer Settings", User Guide.
• The machine recovers from the Sleep mode when you touch the screen of the control panel.
• (Energy Saver Key) appears on the control panel screen only. The key does not appear when
you access the screen from a client computer.
16
(Energy Saver Key).
(Energy Saver Key).